A factory trial now underway in Japan could solve one of the biggest bottlenecks in clean fusion energy. The challenge is simple: how to mass-produce next-generation superconducting wire.
Gigaphoton builds the high-precision lasers used to manufacture microchips. Now, the company has sent one of its industrial excimer lasers to a commercial wire-making plant in Japan. The trial takes the technology out of the research lab and puts it straight onto an active production line.
Engineers have begun testing the system, called the L300KZ, with an aim to find out if high-performance wire can be made rapidly, cheaply, and in high volumes.
Fusion with powerful magnets
Fusion reactors aim to generate clean power by mimicking the sun’s process. To do this, they must trapsuperheated plasmainside a tight magnetic cage so it never touches the vessel walls.
These powerful magnets depend on rare-earth barium copper oxide, known as REBCO. As a “high-temperature” superconductor, REBCO loses all electrical resistance at far more practical cryogenic temperatures than traditional materials.
This allows massive electrical currents to flow through small coils without wasting energy as heat. Yet producing REBCO wire remains painfully slow and costly.
Chipmaking precision to superconducting wire
Factories build the material layer by atomic layer using pulsed laser deposition. Inside a vacuum chamber, short pulses ofhigh-energy ultraviolet laserlight strike a target. The material vaporizes into a plume of particles, settling onto a metal tape as a micro-thin film.
More from Energy
See AllEnergyNew lithium-sulfur battery pushes sulfur to 1,700 Wh/kg with third electronEnergyOffshore wind farm with 33 giant 18-MW turbines begins full operation in ChinaEnergyUS firm begins making lithium-ion batteries for defense that work in extreme coldEnergy360 feet recyclable wind turbine blade built, achieves 95% recovery rate for key raw materialsEnergyWorld’s first isotope refinery project that can transform fusion innovation gets funding boostIf the laser beam wavers even slightly, defects ruin the crystalline structure. When that happens, the wire’s performance degrades, and its current-carrying capacity drops sharply.
This is where semiconductor manufacturing comes in. For decades, Gigaphoton has produced krypton-fluoride (KrF) excimer lasers that project microscopic circuit patterns onto silicon wafers. These chipmaking systems run day and night without stopping.
The L300KZ adapts that same platform for thin-film deposition. It delivers high pulse energy while keeping power output steady over long shifts. In a factory environment, that kind of stability prevents costly downtime.
During the trial, engineers will measure how tiny changes in laser settings alter the quality of the film. Their aim is to establish a dependable recipe for high-volume manufacturing.
Far-reaching ambitions
The project is backed by the Japanese Cabinet Office under Goal 10 of its Moonshot Research and Development Program. The initiative funds fundamental superconducting technologies that could serve several competing fusion reactor designs.
The technology could also reach well beyond nuclear energy. Tatsuo Enami, President and CEO of Gigaphoton, pointed out that reliable thin-film deposition has broad industrial value.
“In addition to high-temperature superconducting wire, we are looking ahead to applications in a broad range of advanced materials fields where PLD technology is used, including functional thin films, advanced electronic materials, and optical materials,”concludedEnami.
For the moment, however, the team has one urgent task: proving that fusion’s most critical material can survive the leap from the laboratory to the assembly line.
Get the latest in engineering, tech, space & science - delivered daily to your inbox.
By subscribing, you agree to our
Terms of Useand
PoliciesYou may unsubscribe at any time.
0
COMMENT
Subscribe to
Today!
Access to exclusive content, expert insights and a deeper dive into engineering and tech. No ads, no limits.
Explore Now!By
Aman TripathiAn active and versatile journalist and news editor. He has covered regular and breaking news for several leading publications and news media, including The Hindu, Economic Times, Tomorrow Makers, and many more. Aman holds expertise in politics, travel, and tech news, especially in AI, advanced algorithms, and blockchain, with a strong curiosity about all things that fall under science and tech.
- 1360 feet recyclable wind turbine blade built, achieves 95% recovery rate for key raw materials
- 2World's first isotope refinery project that can transform fusion innovation gets funding boost
- 3World's longest-range twin-engine jet gets new turbofan with up to 8% more thrust
- 4New offshore fiber system raises $7M to absorb uranium from seawater for nuclear fuel
- 5US nuclear fuel plant with 5-metric-ton uranium capacity moves closer to operations
A factory trial now underway in Japan could solve one of the biggest bottlenecks in clean fusion energy. The challenge is simple: how to mass-produce next-generation superconducting wire.
Gigaphoton builds the high-precision lasers used to manufacture microchips. Now, the company has sent one of its industrial excimer lasers to a commercial wire-making plant in Japan. The trial takes the technology out of the research lab and puts it straight onto an active production line.
Engineers have begun testing the system, called the L300KZ, with an aim to find out if high-performance wire can be made rapidly, cheaply, and in high volumes.
Fusion with powerful magnets
Fusion reactors aim to generate clean power by mimicking the sun’s process. To do this, they must trapsuperheated plasmainside a tight magnetic cage so it never touches the vessel walls.
These powerful magnets depend on rare-earth barium copper oxide, known as REBCO. As a “high-temperature” superconductor, REBCO loses all electrical resistance at far more practical cryogenic temperatures than traditional materials.
This allows massive electrical currents to flow through small coils without wasting energy as heat. Yet producing REBCO wire remains painfully slow and costly.
Chipmaking precision to superconducting wire
Factories build the material layer by atomic layer using pulsed laser deposition. Inside a vacuum chamber, short pulses ofhigh-energy ultraviolet laserlight strike a target. The material vaporizes into a plume of particles, settling onto a metal tape as a micro-thin film.
More from Energy
See AllEnergyNew lithium-sulfur battery pushes sulfur to 1,700 Wh/kg with third electronEnergyOffshore wind farm with 33 giant 18-MW turbines begins full operation in ChinaEnergyUS firm begins making lithium-ion batteries for defense that work in extreme coldEnergy360 feet recyclable wind turbine blade built, achieves 95% recovery rate for key raw materialsEnergyWorld’s first isotope refinery project that can transform fusion innovation gets funding boostIf the laser beam wavers even slightly, defects ruin the crystalline structure. When that happens, the wire’s performance degrades, and its current-carrying capacity drops sharply.
This is where semiconductor manufacturing comes in. For decades, Gigaphoton has produced krypton-fluoride (KrF) excimer lasers that project microscopic circuit patterns onto silicon wafers. These chipmaking systems run day and night without stopping.
The L300KZ adapts that same platform for thin-film deposition. It delivers high pulse energy while keeping power output steady over long shifts. In a factory environment, that kind of stability prevents costly downtime.
During the trial, engineers will measure how tiny changes in laser settings alter the quality of the film. Their aim is to establish a dependable recipe for high-volume manufacturing.
Far-reaching ambitions
The project is backed by the Japanese Cabinet Office under Goal 10 of its Moonshot Research and Development Program. The initiative funds fundamental superconducting technologies that could serve several competing fusion reactor designs.
The technology could also reach well beyond nuclear energy. Tatsuo Enami, President and CEO of Gigaphoton, pointed out that reliable thin-film deposition has broad industrial value.
“In addition to high-temperature superconducting wire, we are looking ahead to applications in a broad range of advanced materials fields where PLD technology is used, including functional thin films, advanced electronic materials, and optical materials,”concludedEnami.
For the moment, however, the team has one urgent task: proving that fusion’s most critical material can survive the leap from the laboratory to the assembly line.
Get the latest in engineering, tech, space & science - delivered daily to your inbox.
By subscribing, you agree to our
Terms of Useand
PoliciesYou may unsubscribe at any time.
0
COMMENT
Subscribe to
Today!
Access to exclusive content, expert insights and a deeper dive into engineering and tech. No ads, no limits.
Explore Now!By
Aman TripathiAn active and versatile journalist and news editor. He has covered regular and breaking news for several leading publications and news media, including The Hindu, Economic Times, Tomorrow Makers, and many more. Aman holds expertise in politics, travel, and tech news, especially in AI, advanced algorithms, and blockchain, with a strong curiosity about all things that fall under science and tech.
- 1360 feet recyclable wind turbine blade built, achieves 95% recovery rate for key raw materials
- 2World's first isotope refinery project that can transform fusion innovation gets funding boost
- 3World's longest-range twin-engine jet gets new turbofan with up to 8% more thrust
- 4New offshore fiber system raises $7M to absorb uranium from seawater for nuclear fuel
- 5US nuclear fuel plant with 5-metric-ton uranium capacity moves closer to operations
