Key Takeaways
Harvard’s solution stacks two layers of freestanding titanium dioxide nanostructures directly on top of one another.
Two-layered metasurfaces can both shape light and cut glare at the nanoscale.
These tiny double-decker lenses could soon power lighter AR/VR headsets, sharper facial recognition, and advanced medical imaging.
Normal antireflection coatings cut glare on smooth, even surfaces, but don’t work well on metasurfaces.
Now, researchers at Harvard SEAS have developed a new bilayer metasurface with a built-in antireflective coating to boost the efficiency of optical devices.
Smartphone cameras use flat, ultra-thin “metalenses” rather than curved glass to focus images and sense depth. Unfortunately, these devices suffer from lost light as unwanted reflections bounce incoming rays away before they reach the sensor.
Harvard team just solved this problem. Led by applied physics professor Federico Capasso, the team created this bilayer metasurface that promises to supercharge optical efficiency across consumer and scientific tech.
Stacked nanostructures
Usual antireflective coatings fail onmetasurfaces.While a metalens looks smooth to the naked eye, it is actually covered in millions of microscopic pillars of varying sizes. Each pillar slows light down at a slightly different rate, meaning a one-size-fits-all coating cannot stop reflections across the entire surface.
Harvard’s solution stacks two layers of freestanding titanium dioxide nanostructures directly on top of one another. Co-first author and graduate student Davide Cassara explained that the upper pillar is specifically designed to match the exact geometry of the pillar beneath it. This design pattern creates customized, point-by-pointreflectioncontrol across the entire lens.
More from Innovation
See AllInnovationElectric aircraft reaches 17,200 feet on solid-state batteries with 64% charge leftInnovation250lb drone helicopter S-100 UAS launches UAV mid-flight, relays video in first testInnovationUS engineers build polymer fiber forest to cool chips by over 60°F without short circuitsInnovationSimple manganese tweak could replace copper foils in next-gen EV batteriesInnovationUS deploys supercomputer with 2,688 NVIDIA chips to accelerate scientific discovery“Antireflection coatings are widely used in technology to minimize residual reflections that are detrimental to device performance,” Capassosaid.“The work we have done here is a first application for bilayer metasurfaces that we expect will lead to a wide-ranging impact in photonics.”
Stopping light loss is only the beginning. Adding a second, independently shaped layer unlocks massive new design freedom for optical engineers.
Researchers tested this design using a free-standing titanium dioxide metalens operating at a 1,310 nm wavelength. According to the study, the metalens achieved sharp focusing and even reduced reflections below those of bare glass. These results confirm that bilayer metasurfaces can simultaneously shape light and suppress glare at the nanoscale.
Stopping light loss at the nanoscale
Future multilayerlensescould manipulate light polarization, eliminate color distortion for crystal-clear imaging, or even trap cold atoms inside quantum computers. The design framework could eventually expand beyond titanium dioxide to other powerhouse materials like silicon.
Major tech players are already taking notice. The project stems from a long-running partnership with Corning Incorporated, a leader in glass and optical physics, backed by funding from the National Science Foundation and the Air Force Office of Scientific Research.
“This research with Harvard showcases the value of long-term collaborations between academia and industry as well as the importance of combining materials science and engineering expertise to real-world product advancements,” said Paulo Dainese, Senior Principal Scientist, Corning. “By combining Corning and Harvard’s deep expertise in optical physics, this research has the potential to drive advancements in optical lens technology across multiple industries.”
With Harvard’s Office of Technology Development actively pursuing commercialization, these microscopic double-decker lenses could soon power the next generation of lightweight AR/VR headsets, sharper facial recognition, and advanced medical imaging.
Get the latest in engineering, tech, space & science - delivered daily to your inbox.
By subscribing, you agree to our
Terms of Useand
PoliciesYou may unsubscribe at any time.
0
COMMENT
Subscribe to
Today!
Access to exclusive content, expert insights and a deeper dive into engineering and tech. No ads, no limits.
Explore Now!Offer ends December 1
Black Friday Offer
50% offyour first year of IE+
$20.99first yearRegular price$41.99
Get IE+ for$20.99Renews at $41.99/year after the first year.Cancel anytime.
By
Mrigakshi DixitMrigakshi is a science journalist who enjoys writing about space exploration, biology, and technological innovations. Her work has been featured in well-known publications including Nature India, Supercluster, The Weather Channel and Astronomy magazine. If you have pitches in mind, please do not hesitate to email her.
- 1Apple plans autonomous agent to rival Meta and Anthropic in controlling apps and devices
- 2US factories prepare to mass-produce transportable nuclear microreactors at scale
- 3Iowa's 1-GW nuclear project explores link to 2,100-MW underground power line
- 4China's 1-GW hybrid power plant pairs gas and batteries to meet data center demand
- 5New photonic quantum computer could crack problems that take thousands of years
Key Takeaways
Harvard’s solution stacks two layers of freestanding titanium dioxide nanostructures directly on top of one another.
Two-layered metasurfaces can both shape light and cut glare at the nanoscale.
These tiny double-decker lenses could soon power lighter AR/VR headsets, sharper facial recognition, and advanced medical imaging.
Normal antireflection coatings cut glare on smooth, even surfaces, but don’t work well on metasurfaces.
Now, researchers at Harvard SEAS have developed a new bilayer metasurface with a built-in antireflective coating to boost the efficiency of optical devices.
Smartphone cameras use flat, ultra-thin “metalenses” rather than curved glass to focus images and sense depth. Unfortunately, these devices suffer from lost light as unwanted reflections bounce incoming rays away before they reach the sensor.
Harvard team just solved this problem. Led by applied physics professor Federico Capasso, the team created this bilayer metasurface that promises to supercharge optical efficiency across consumer and scientific tech.
Stacked nanostructures
Usual antireflective coatings fail onmetasurfaces.While a metalens looks smooth to the naked eye, it is actually covered in millions of microscopic pillars of varying sizes. Each pillar slows light down at a slightly different rate, meaning a one-size-fits-all coating cannot stop reflections across the entire surface.
Harvard’s solution stacks two layers of freestanding titanium dioxide nanostructures directly on top of one another. Co-first author and graduate student Davide Cassara explained that the upper pillar is specifically designed to match the exact geometry of the pillar beneath it. This design pattern creates customized, point-by-pointreflectioncontrol across the entire lens.
More from Innovation
See AllInnovationElectric aircraft reaches 17,200 feet on solid-state batteries with 64% charge leftInnovation250lb drone helicopter S-100 UAS launches UAV mid-flight, relays video in first testInnovationUS engineers build polymer fiber forest to cool chips by over 60°F without short circuitsInnovationSimple manganese tweak could replace copper foils in next-gen EV batteriesInnovationUS deploys supercomputer with 2,688 NVIDIA chips to accelerate scientific discovery“Antireflection coatings are widely used in technology to minimize residual reflections that are detrimental to device performance,” Capassosaid.“The work we have done here is a first application for bilayer metasurfaces that we expect will lead to a wide-ranging impact in photonics.”
Stopping light loss is only the beginning. Adding a second, independently shaped layer unlocks massive new design freedom for optical engineers.
Researchers tested this design using a free-standing titanium dioxide metalens operating at a 1,310 nm wavelength. According to the study, the metalens achieved sharp focusing and even reduced reflections below those of bare glass. These results confirm that bilayer metasurfaces can simultaneously shape light and suppress glare at the nanoscale.
Stopping light loss at the nanoscale
Future multilayerlensescould manipulate light polarization, eliminate color distortion for crystal-clear imaging, or even trap cold atoms inside quantum computers. The design framework could eventually expand beyond titanium dioxide to other powerhouse materials like silicon.
Major tech players are already taking notice. The project stems from a long-running partnership with Corning Incorporated, a leader in glass and optical physics, backed by funding from the National Science Foundation and the Air Force Office of Scientific Research.
“This research with Harvard showcases the value of long-term collaborations between academia and industry as well as the importance of combining materials science and engineering expertise to real-world product advancements,” said Paulo Dainese, Senior Principal Scientist, Corning. “By combining Corning and Harvard’s deep expertise in optical physics, this research has the potential to drive advancements in optical lens technology across multiple industries.”
With Harvard’s Office of Technology Development actively pursuing commercialization, these microscopic double-decker lenses could soon power the next generation of lightweight AR/VR headsets, sharper facial recognition, and advanced medical imaging.
Get the latest in engineering, tech, space & science - delivered daily to your inbox.
By subscribing, you agree to our
Terms of Useand
PoliciesYou may unsubscribe at any time.
0
COMMENT
Subscribe to
Today!
Access to exclusive content, expert insights and a deeper dive into engineering and tech. No ads, no limits.
Explore Now!Offer ends December 1
Black Friday Offer
50% offyour first year of IE+
$20.99first yearRegular price$41.99
Get IE+ for$20.99Renews at $41.99/year after the first year.Cancel anytime.
By
Mrigakshi DixitMrigakshi is a science journalist who enjoys writing about space exploration, biology, and technological innovations. Her work has been featured in well-known publications including Nature India, Supercluster, The Weather Channel and Astronomy magazine. If you have pitches in mind, please do not hesitate to email her.
- 1Apple plans autonomous agent to rival Meta and Anthropic in controlling apps and devices
- 2US factories prepare to mass-produce transportable nuclear microreactors at scale
- 3Iowa's 1-GW nuclear project explores link to 2,100-MW underground power line
- 4China's 1-GW hybrid power plant pairs gas and batteries to meet data center demand
- 5New photonic quantum computer could crack problems that take thousands of years

