MIT researchers have developed a soft sensor that recreates its own three-dimensional shape as it bends, folds, and twists. The technology could help control robots remotely, create motion-tracking garments, and measure patients’ progress during physical rehabilitation.
The system embeds flexible optical fibers in silicone and uses changes in transmitted light to track surface deformations. Software then converts those measurements into a digital reconstruction that follows the material’s movements almost in real time.
Unlike motion-capture systems that rely on rigid sensors attached to clothing, the design uses soft components throughout its sensing surface. It can also tolerate damaged fibers without losing its ability to reconstruct its overall shape.
Soft fibers track movement
The researchers fabricated optical fibers using a flexible rubber core surrounded by black rubber cladding. They deliberately roughened one side of each core to make its response to bending more distinctive.
When a fiber bends, some light scatters away from its path. The roughened surface makes this effect sensitive to bending direction, allowing researchers to estimate how each fiber curves by measuring the light emerging from its opposite end.
Individual fibers can detect curvature along a line, but reconstructing an entire surface presents a greater challenge. MIT’s team addressed this problem by embedding multiple fibers into a stretchable silicone sheet.
More from Innovation
See AllInnovationGreen hydrogen process reaches 98% efficiency while producing valuable chemicalsEnergyNew protein-based membranes aim to separate lithium from sodium for battery productionInnovationWorld’s first drone to reach the stratosphere climbs 34,245 feet for weather dataInnovationNew testing technique shows how water-based cells convert waste heat to electricityInnovationWatch: 27-foot thermal airship built from fabric and model-aircraft parts takes flightComputer simulations helped the researchers compare different fiber arrangements, including checkerboard and zigzag patterns. A particular zigzag configuration proved most effective at capturing complex changes in the sheet’s shape.
Software reconstructs 3D shapes
The researchers fabricated a physical sheet using that arrangement. LEDs send light through the fibers, while sensors at their opposite ends measure the output. An external circuit board collects and amplifies the readings.
An algorithm translates those measurements into a three-dimensional representation of the sheet. During demonstrations, the researchers folded the material diagonally in opposite directions, and its digital counterpart followed the changing geometry.
They also placed the sheet over precisely shaped,3D-printedmolds to evaluate its accuracy. The reconstructed surface had an error of less than 0.4 centimeters, according to Qifan Yu, an MIT mechanical engineering graduate student.
Yu said comparable systems using rigid sensors typically produce errors of around 1 to 2 centimeters. The team also demonstrated that the sheet could reconstruct its overall shape even after some fibers were cut or disconnected.
Wearable sensors could aid therapy
The researchers envision garments that let users control video game characters or operaterobotsremotely. The technology could also help physical therapists measure patients’ mobility during rehabilitation.
A therapist could wrap the material around a patient’s arm or leg to record movement and range of motion. Repeated measurements could help clinicians compare mobility across sessions and evaluate recovery. Co-author Kaitlyn Becker, an MIT mechanical engineering assistant professor, said the technology could help therapists compare patient evaluations over time.
The team now plans to make the fibers thinner. Their current fibers measure about 1 millimeter across, but improved fabrication methods could reduce that thickness to tens of micrometers. Thinner fibers would allow researchers to embed more sensing elements into garments, potentially capturing finer details of body movement.
The study is published in the journalAdvanced Intelligent Systems.
Get the latest in engineering, tech, space & science - delivered daily to your inbox.
By subscribing, you agree to our
Terms of Useand
PoliciesYou may unsubscribe at any time.
0
COMMENT
Subscribe to
Today!
Access to exclusive content, expert insights and a deeper dive into engineering and tech. No ads, no limits.
Explore Now!By
Aamir KhollamAamir is a seasoned tech journalist with experience at Exhibit Magazine, Republic World, and PR Newswire. With a deep love for all things tech and science, he has spent years decoding the latest innovations and exploring how they shape industries, lifestyles, and the future of humanity.
- 1US suspends Microsoft, Adobe and 6 IT firms from key green card certification program
- 2Bamboo waste makes plastic 173% tougher, blocks unwanted signals in smartphones
- 3New US plant to turn wastewater into 3,000 tons of lithium for batteries
- 4US' 100,000-ton aircraft carrier strike group launched 450 land-attack cruise missiles against Iran
- 5World’s first lead-cooled nuclear plant installs massive 95-ton steam separators
MIT researchers have developed a soft sensor that recreates its own three-dimensional shape as it bends, folds, and twists. The technology could help control robots remotely, create motion-tracking garments, and measure patients’ progress during physical rehabilitation.
The system embeds flexible optical fibers in silicone and uses changes in transmitted light to track surface deformations. Software then converts those measurements into a digital reconstruction that follows the material’s movements almost in real time.
Unlike motion-capture systems that rely on rigid sensors attached to clothing, the design uses soft components throughout its sensing surface. It can also tolerate damaged fibers without losing its ability to reconstruct its overall shape.
Soft fibers track movement
The researchers fabricated optical fibers using a flexible rubber core surrounded by black rubber cladding. They deliberately roughened one side of each core to make its response to bending more distinctive.
When a fiber bends, some light scatters away from its path. The roughened surface makes this effect sensitive to bending direction, allowing researchers to estimate how each fiber curves by measuring the light emerging from its opposite end.
Individual fibers can detect curvature along a line, but reconstructing an entire surface presents a greater challenge. MIT’s team addressed this problem by embedding multiple fibers into a stretchable silicone sheet.
More from Innovation
See AllInnovationGreen hydrogen process reaches 98% efficiency while producing valuable chemicalsEnergyNew protein-based membranes aim to separate lithium from sodium for battery productionInnovationWorld’s first drone to reach the stratosphere climbs 34,245 feet for weather dataInnovationNew testing technique shows how water-based cells convert waste heat to electricityInnovationWatch: 27-foot thermal airship built from fabric and model-aircraft parts takes flightComputer simulations helped the researchers compare different fiber arrangements, including checkerboard and zigzag patterns. A particular zigzag configuration proved most effective at capturing complex changes in the sheet’s shape.
Software reconstructs 3D shapes
The researchers fabricated a physical sheet using that arrangement. LEDs send light through the fibers, while sensors at their opposite ends measure the output. An external circuit board collects and amplifies the readings.
An algorithm translates those measurements into a three-dimensional representation of the sheet. During demonstrations, the researchers folded the material diagonally in opposite directions, and its digital counterpart followed the changing geometry.
They also placed the sheet over precisely shaped,3D-printedmolds to evaluate its accuracy. The reconstructed surface had an error of less than 0.4 centimeters, according to Qifan Yu, an MIT mechanical engineering graduate student.
Yu said comparable systems using rigid sensors typically produce errors of around 1 to 2 centimeters. The team also demonstrated that the sheet could reconstruct its overall shape even after some fibers were cut or disconnected.
Wearable sensors could aid therapy
The researchers envision garments that let users control video game characters or operaterobotsremotely. The technology could also help physical therapists measure patients’ mobility during rehabilitation.
A therapist could wrap the material around a patient’s arm or leg to record movement and range of motion. Repeated measurements could help clinicians compare mobility across sessions and evaluate recovery. Co-author Kaitlyn Becker, an MIT mechanical engineering assistant professor, said the technology could help therapists compare patient evaluations over time.
The team now plans to make the fibers thinner. Their current fibers measure about 1 millimeter across, but improved fabrication methods could reduce that thickness to tens of micrometers. Thinner fibers would allow researchers to embed more sensing elements into garments, potentially capturing finer details of body movement.
The study is published in the journalAdvanced Intelligent Systems.
Get the latest in engineering, tech, space & science - delivered daily to your inbox.
By subscribing, you agree to our
Terms of Useand
PoliciesYou may unsubscribe at any time.
0
COMMENT
Subscribe to
Today!
Access to exclusive content, expert insights and a deeper dive into engineering and tech. No ads, no limits.
Explore Now!By
Aamir KhollamAamir is a seasoned tech journalist with experience at Exhibit Magazine, Republic World, and PR Newswire. With a deep love for all things tech and science, he has spent years decoding the latest innovations and exploring how they shape industries, lifestyles, and the future of humanity.
- 1US suspends Microsoft, Adobe and 6 IT firms from key green card certification program
- 2Bamboo waste makes plastic 173% tougher, blocks unwanted signals in smartphones
- 3New US plant to turn wastewater into 3,000 tons of lithium for batteries
- 4US' 100,000-ton aircraft carrier strike group launched 450 land-attack cruise missiles against Iran
- 5World’s first lead-cooled nuclear plant installs massive 95-ton steam separators
