Yale researchers have found a way to make flowing fluids remember what happened before, using tiny flexible fibers that change shape under pressure. The discovery could help engineers develop soft robots that process information without conventional electronic controllers.
The idea turns a familiar engineering problem on its head. Most fluid systems respond to the conditions they encounter, but the Yale design can retain traces of earlier flows. Its physical components effectively store information, allowing past events to influence how the system behaves next.
Fibers that remember
Inside a microfluidicchip, researchers placed flexible fibers within a network of narrow channels. Each channel measures roughly half the width of a human hair in depth.
As fluid moves through the channels, pressure pushes individual fibers between two stable configurations. Each position changes the path available to the fluid, creating a physical record of the system’s previous state.
Engineers could represent the two configurations as binary digits, or zeros and ones. Unlike conventional computer memory, the arrangement does not need electronic components to switch between states.
Abhineet Rajput, the study’s lead author and a graduate student in Professor Amir Pahlavan’s lab, explained the distinction. “While conventional microfluidics relies on active elements, this system uses microfibers to passively store information,” Rajput said.
More from Innovation
See AllInnovationOxygen-based chipmaking method controls 2D crystal growth with over 99% successInnovationNew charging system delivers 800 kWh in 18 minutes for electric mining trucksInnovationHow this 50-acre factory builds 48,000 miles of undersea cables that connect the worldInnovationNew two-phase system for chip cooling could reduce short-circuit risksInnovationHyundai digs full-scale nuclear waste hole with 18.7-foot foldable cutterThe fibers can also influence one another. Their interactions allow individual changes to shape the behavior of the wider network, producing a more complex form of physical memory.
Brain made of fluid
The research could open another route to controlling soft robots. Such machines often need to bend, squeeze through tight spaces, or operate in environments that challenge conventional hardware.
A fluidic controller could use pressure and flow rates to carry signals. Channels would connect different parts of the system, while the flexible fibers would regulate fluid movement and retain information.
Pahlavan sees particular value in environments where electronics face limitations. “We could design a fully fluidic controller that can be integrated into asoft robotand effectively act as its brain,” said Pahlavan, an assistant professor of mechanical engineering at Yale.
Electromagnetic interference can disrupt electronic systems in certain operating environments. A controller built around fluid movement could offer an alternative, although researchers still need to demonstrate how reliably it can direct a robot through practical tasks.
Can the system learn?
Memory is only part of the researchers’ ambition. The next question is whether engineers can train fluidic networks to produce specific responses.
Training could change how a network reacts to incoming flows, giving it a way to adapt its behavior. Achieving that would extend the system beyond retaining past information toward physical learning.
The same principle could interest biologists studying organisms that navigate their surroundings without a brain. Slime molds, for example, can find efficient routes through mazes. Researchers also want to understand how fungi and plant roots respond to environmental changes.
Fluidic networks could offer a physical model for investigating how interactions and accumulated experience shape behavior. Whether the technology can eventually learn useful tasks remains an open question.
The findings appear in the journalPhysical Review X.
Get the latest in engineering, tech, space & science - delivered daily to your inbox.
By subscribing, you agree to our
Terms of Useand
PoliciesYou may unsubscribe at any time.
0
COMMENT
Subscribe to
Today!
Access to exclusive content, expert insights and a deeper dive into engineering and tech. No ads, no limits.
Explore Now!By
Aamir KhollamAamir is a seasoned tech journalist with experience at Exhibit Magazine, Republic World, and PR Newswire. With a deep love for all things tech and science, he has spent years decoding the latest innovations and exploring how they shape industries, lifestyles, and the future of humanity.
- 1New 800V battery for electric trucks delivers 358 kW, charges to 80% in 42 minutes
- 2From wind farms to concrete: Old turbine blades could cut rebar emissions by 90%
- 3US technology to tap 100,000 tons of lithium for EV batteries and energy storage
- 4Paper mill waste could become key material for cheaper sodium-ion batteries
- 5Hanwha's new artillery system combines 155 mm firepower with wheeled mobility
Yale researchers have found a way to make flowing fluids remember what happened before, using tiny flexible fibers that change shape under pressure. The discovery could help engineers develop soft robots that process information without conventional electronic controllers.
The idea turns a familiar engineering problem on its head. Most fluid systems respond to the conditions they encounter, but the Yale design can retain traces of earlier flows. Its physical components effectively store information, allowing past events to influence how the system behaves next.
Fibers that remember
Inside a microfluidicchip, researchers placed flexible fibers within a network of narrow channels. Each channel measures roughly half the width of a human hair in depth.
As fluid moves through the channels, pressure pushes individual fibers between two stable configurations. Each position changes the path available to the fluid, creating a physical record of the system’s previous state.
Engineers could represent the two configurations as binary digits, or zeros and ones. Unlike conventional computer memory, the arrangement does not need electronic components to switch between states.
Abhineet Rajput, the study’s lead author and a graduate student in Professor Amir Pahlavan’s lab, explained the distinction. “While conventional microfluidics relies on active elements, this system uses microfibers to passively store information,” Rajput said.
More from Innovation
See AllInnovationOxygen-based chipmaking method controls 2D crystal growth with over 99% successInnovationNew charging system delivers 800 kWh in 18 minutes for electric mining trucksInnovationHow this 50-acre factory builds 48,000 miles of undersea cables that connect the worldInnovationNew two-phase system for chip cooling could reduce short-circuit risksInnovationHyundai digs full-scale nuclear waste hole with 18.7-foot foldable cutterThe fibers can also influence one another. Their interactions allow individual changes to shape the behavior of the wider network, producing a more complex form of physical memory.
Brain made of fluid
The research could open another route to controlling soft robots. Such machines often need to bend, squeeze through tight spaces, or operate in environments that challenge conventional hardware.
A fluidic controller could use pressure and flow rates to carry signals. Channels would connect different parts of the system, while the flexible fibers would regulate fluid movement and retain information.
Pahlavan sees particular value in environments where electronics face limitations. “We could design a fully fluidic controller that can be integrated into asoft robotand effectively act as its brain,” said Pahlavan, an assistant professor of mechanical engineering at Yale.
Electromagnetic interference can disrupt electronic systems in certain operating environments. A controller built around fluid movement could offer an alternative, although researchers still need to demonstrate how reliably it can direct a robot through practical tasks.
Can the system learn?
Memory is only part of the researchers’ ambition. The next question is whether engineers can train fluidic networks to produce specific responses.
Training could change how a network reacts to incoming flows, giving it a way to adapt its behavior. Achieving that would extend the system beyond retaining past information toward physical learning.
The same principle could interest biologists studying organisms that navigate their surroundings without a brain. Slime molds, for example, can find efficient routes through mazes. Researchers also want to understand how fungi and plant roots respond to environmental changes.
Fluidic networks could offer a physical model for investigating how interactions and accumulated experience shape behavior. Whether the technology can eventually learn useful tasks remains an open question.
The findings appear in the journalPhysical Review X.
Get the latest in engineering, tech, space & science - delivered daily to your inbox.
By subscribing, you agree to our
Terms of Useand
PoliciesYou may unsubscribe at any time.
0
COMMENT
Subscribe to
Today!
Access to exclusive content, expert insights and a deeper dive into engineering and tech. No ads, no limits.
Explore Now!By
Aamir KhollamAamir is a seasoned tech journalist with experience at Exhibit Magazine, Republic World, and PR Newswire. With a deep love for all things tech and science, he has spent years decoding the latest innovations and exploring how they shape industries, lifestyles, and the future of humanity.
- 1New 800V battery for electric trucks delivers 358 kW, charges to 80% in 42 minutes
- 2From wind farms to concrete: Old turbine blades could cut rebar emissions by 90%
- 3US technology to tap 100,000 tons of lithium for EV batteries and energy storage
- 4Paper mill waste could become key material for cheaper sodium-ion batteries
- 5Hanwha's new artillery system combines 155 mm firepower with wheeled mobility
